Windshield Channel for Jeep Wrangler, 97-02 (Drill-in style)

For use with Standard Bestop Bikini

(For Bestop Header Bikini's use Bestop One Piece Header Channel # 51238-01)

Fitting the Windshield Channel to your Wrangler TJ

Locate the Left and Right Windshield Channels in the parts kit. Orient them with the

open edge up, the foam gasket in the channel facing the windshield and place them

along the top, inside of the windshield. The cutouts at the outside corners of the

channels are round to accommodate the sport bars. The ends with the rectangular

cutouts will and must butt up together to form an opening around the footman loop

attached to the windshield frame at the center of the windshield. The other cutouts in

the channels will fit around the header latches.

Mark the locations of the five mounting holes in each channel. Center punch and drill

a 1/8" hole at each location. Install both channels using ten (10) #8 x 1/2" Self-Tapping

Phillips Head Screws

(Shipping Direct from Europe)